View HIR11-21C-L11-TR8-15_8303340.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 1 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 features ? high reliability ? small double-end package ? peak wavelength ? p=850nm ? package in 8mm tape on 7? diameter reel ? low forward voltage ? pb free ? the product itself will remain within rohs compliant version. descriptions hir11-21c/l11/tr8 is an infrared emitting diode in miniature smd package which is molded in a water clear plastic with flat top view lens. the device is spectrally matched with silicon photodiode and phototransistor. applications ? pcb mounted infrared sensor ? infrared remote control units with high power requirement ? smoke detector ? infrared applied system device selection guide part category chip material resin color hir gaalas water clear
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 2 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions ? 0.1mm absolute maximum ratings (ta=25
) parameter symbol rating units continuous forward current i f 65 ma reverse voltage v r 5 v operating temperature t opr -25 ~ +85
storage temperature t stg -40 ~ +85
soldering temperature *1 t sol 260
power dissipation at(or below) 25
free air temperature p d 130 mw notes: *1. soldering time 5 seconds.
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 3 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com electro-optical characteristics (ta=25
) parameter symbol condition min. typ. max. units i f =20ma 1.0 2.0 -- radiant intensity ie . i f =100ma pulse width 100 ? s ,duty 1% -- 10 -- mw /sr peak wavelength ? p i f =20ma -- 850 -- nm spectral bandwidth ? i f =50ma -- 45 -- nm i f =20ma -- 1.45 1.65 forward voltage v f . i f =100ma pulse width 100 ? s ,duty 1% -- 1.80 2.40 v reverse current i r v r =5v -- -- 10 ? a view angle 2 1/2 i f =20ma -- 75 -- deg
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 4 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com 0 -25 0 40 20 60 100 80 790 0 20 40 60 80 100 890 850 810 830 870 930 910 950 i f =20ma ta=25 c typical electro-optical characteristics curves fig.1 forward current vs. fig.2 spectral distributio n ambient temperature fig.3 forward current fig.4 relative intensity vs. vs. forward voltage forward current
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 5 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com -20 0.6 0.9 0.7 0.8 1.0 0.2 0.4 0 0.2 0.4 0.6 50 70 80 60 40 30 -10 0 20 10 typical electro-optical characteristics curves fig.5 relative radiant intensity vs. angular displacement
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 6 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com precautions for use 1. over-current-proof customer must apply resistors for protection , otherwise slight voltage shift will cause big current change ( burn out will happen ). 2. storage 2.1 do not open moisture proof bag before the products are ready to use. 2.2 before opening the package, the leds should be kept at 30
or less and 90%rh or less. 2.3 the leds should be used within a year. 2.4 after opening the package, the leds should be kept at 30
or less and 70%rh or less. 2.5 the leds should be used within 168 hours (7 days) after opening the package. 2.6 if the moisture absorbent material (silica gel) has faded away or the leds have exceeded the storage time, baking treatment should be performed using the following conditions. baking treatment : 60 ? 5
for 24 hours. 3. soldering condition 3.1 pb-free solder temperature profile 3.2 reflow soldering should not be done more than two times. 3.3 when soldering, do not put stress on the leds during heating. 3.4 after soldering, do not warp the circuit board.
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 7 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com 4.soldering iron each terminal is to go to the tip of soldering iron temperature less than350
for 3 seconds within once in less than the soldering iron capacity 25w. leave two seconds and more intervals, and do soldering of each terminal. be careful because the damage of the product is often started at the time of the hand solder. 5.repairing repair should not be done after the leds have been soldered. when repairing is unavoidable, a double-head soldering iron should be used (as below figure). it should be confirmed beforehand whether the characteristics of the leds will or will not be damaged by repairing.
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 8 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com package dimensions note: the tolerances unless mentioned are ? 0.1, unit=mm. carrier taping dimensions: loaded quantity per reel 2000pcs/reel note: the tolerances unless mentioned is ? 0.1mm, unit = mm
lifecyclephase: revision : 3 expired period: forever release date:2013-06-04 12:13:29.0 data sheet 1206 package chip infrared led with inner lens hir11-21c/l11/tr8 9 copyright ? 2013, everlight all rights reserved. release date : 5/28/2013. issue no: dir-0000947. rev:3 www.everlight.com label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: ranks hue: peak wavelength ref: reference lot no: lot number notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. everlight assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets include materials protected under copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent. everlight electronics co., ltd. tel: 886-2-2685-6688 office: no. 6-8, zhonghua rd., shulin dist., fax: 886-2685-2699 d 6897 new taipei city 23860, taiwan http://www.everlight.com

▲Up To Search▲

Price & Availability of HIR11-21C-L11-TR8-15

	To Download HIR11-21C-L11-TR8-15 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .